Keg Kit: 5 Gal Ball Lock Used Keg, New 5 lb CO2 Tank, Regulator & Parts Homebrew

Description

Keg Kit
Ball Lock Keg
CO2 Regulator
5 lb. CO2 Tank
Reconditioned 5 Gallon Ball Lock Keg
New 5 lb. Aluminum CO2 Cylinder
New Dual Gauge CO2 Regulator
Perfect For Homebrew Set Up
Description
This kit contains everything you need to build your own amazing homebrew set up whether it be for beer, hard cider, soda, cold brew coffee, or Kombucha tea. Check out the amazing components we've paired together to not only bring you cost savings but to bring you peace of mind knowing each item is compatible and easy to assemble your very own homebrew system.
This 5-gallon ball lock Cornelius "Corny" style keg has a dual grip rubber handle and rubber boot bottom. It has seen its fair share of parties but cleans up pretty well, and we would know because we have done the work for you. We've cleaned, de-labeled, sanitized, and pressure tested prior to sending on to you for all of your beverage needs. We still recommend washing kegs with warm water and a mild soap prior to use since these are still reconditioned and not new. This comes with a pressure relief valve built right into the lid, a benefit that pin lock kegs do not offer. There's no question as to why this is our most popular keg for brewers everywhere.
O-rings, valves, and other parts are replaced on an as needed basis to ensure the keg holds pressure prior to shipment. But we still recommend keeping a spare O-ring kit on hand at all times as they do tend to have a tendency of drying out.
And just to make sure, we've included one gratis!
This new multi-purpose 5 lb. aluminum tank is lightweight yet rust resistant with its thick, corrosion proof body.  This has undergone certification within 180 days of shipment (but more typically within 60-90 days) and offers 1800 PSI service pressure. Fully equipped with standard CGA320 valve. This is one of the more popular cylinders due to its ease of use and transport as well as its plethora of uses; from amazing homebrew soda or Kombucha tea to hydroponics, industrial, aquarium and welding use.
This cylinder meets all required Department of Transportation specifications and is DOT and TC approved. Consistent Tare weight.
Please Note: All aluminum CO2 cylinders are sourced from several manufacturers. As a result, the cylinder you receive may have a brushed dome or unfinished dome. We apologize, but we are unable to take special requests at this time.
All cylinders ship empty.
We have paired these with our top-shelf Taprite CO2 Dual Gauge Regulator. Solid brass body, easy-adjust locking polycarbonate bonnet, and high volumetric flow for continuity in product dispensing. This comes equipped with a permanent quad-ring seal on the inlet so there is no need for washers every tank change. Built-in pressure safety system with a burst at 55 to 60 PSI. This is approved for use by all major beer distributors and breweries.
Other items included in this kit:
5' NSF 3/16" liquid line tubing and 4' NSF 5/16" gas line tubing
One picnic faucet with 4 hose clamps
5/16" barbed swivel
NSF Approved Threaded Ball Lock Gas Disconnect
NSF Approved Barbed Ball Lock Liquid Disconnect
Keg O-ring Kit
5 Gallon Ball Lock Keg Specifications
Dimensions
8.5" diameter x 25" height - may vary slightly from wear
Weight
Approximately 9.4 lbs.
Keg Lock Type
Ball Lock
Pressure Relief
Automatic at 130 PSI
Regulations
NSF approved
5 lb. Aluminum Cylinder Specifications
Dimensions
5.25" diameter x 17.5" height (including valve)
Weight
Approximately 7.8 lbs.
Service Pressure
1800 PSI
Recertification
5 years
Also from Beverage Elements
Nitrogen Keg Kit
Stout Kegerator Kit
Dual Keg Kit
Visit the Beverage Elements eBay Store
Sign Up For Our Newsletter!
Shipping Info
We normally ship within 1-2 business days after we get your order. We ship FedEx or USPS, depending on the size and weight of your package.
Delivery time varies by location but is usually within 3-5 business days of shipment.
Sorry, but we can't ship to Alaska, Hawaii, Puerto Rico, APO/FPO addresses, PO boxes, or outside the United States.
Returns and Exchanges
Customer satisfaction is our number one priority, and we hope you enjoy your purchase. In the event you would like to return an item, the following conditions apply:
Pressure-test all kegs and CO2 cylinders immediately—don't wait to check them.
Do not remove the valve from any cylinder. We can't accept returns if the valve has been removed, even if reinstalled.
Returns are accepted within 30 days after you receive your order; please contact us before shipping any item for return.
Returned items must be in the same condition as originally received—unused, unmodified/not disassembled, and with no gas or liquids inside.
Return shipping is paid by the buyer.
A restocking fee of 10% of the purchase price may apply.
About Beverage Elements
Homebrew, cold brew nitro coffee, soda, Kombucha tea - however you get your drink on, Beverage Elements has what you need to drink in style.
Just like our name says, Beverage Elements is about kegs, cylinders, taps, lines, disconnects, parts, accessories ... all the elements of delicious drinking, successful socializing, and premier partying.
You, our loyal drinking buddies, are the most important thing to us, and your satisfaction is our priority. That's why we're Top Rated Plus, and why we work every day to make sure your drinking experience is nothing short of awesome.
Cheers!
Contact
We're happy to help with questions before and after your purchase. Our customer service representatives can be reached between 8:00 am - 4:00 pm CST, Monday through Friday.